I was originally going to build a station for 10 meters, but as planning for the event went on, nobody had signed up for 80 which was surprising because it is a very active band on field day. I figured why not switch, since I could never setup a good station for 80 meters at home, the antennas are just too big.
Tuesday, June 26, 2007
Field Day 2007
Field Day 2007 was a lot more fun for me than last year. First, the entire family was there, Amy, Zoe, Aidan, & Alex, even Al, my father in law. Second, I chose to be the band captain for 80 meters. Our station made 300 contacts in 24 hours, 200 using Morse Code and 100 using voice.

I was originally going to build a station for 10 meters, but as planning for the event went on, nobody had signed up for 80 which was surprising because it is a very active band on field day. I figured why not switch, since I could never setup a good station for 80 meters at home, the antennas are just too big.
I was originally going to build a station for 10 meters, but as planning for the event went on, nobody had signed up for 80 which was surprising because it is a very active band on field day. I figured why not switch, since I could never setup a good station for 80 meters at home, the antennas are just too big.
Sunday, June 17, 2007
Frederick Amateur Radio Club Hamfest
Each year the Frederick Amateur Radio Club puts on a hamfest, which is basically a big flea market with a folks selling a lot of ham radio gear and electronics. There are a few commercial vendors as well. This year's hamfest worked out quite well, we were able to save some money on expenses and sold a lot more tickets than last year. Our total income looks like it will be more than triple what we made in 2006, just about enough to cover a year's worth of club expenses.
Saturday, June 16, 2007
Quote from Fox News article about TV dads
Father Knows Best: 10 Life Lessons From TV Dads
By C. Spencer Beggs
"Archie Bunker may have been the most racist, homophobic blasphemer to grace the small screen until Eric Cartman was doodled into "South Park."
I wonder how many people have actually watched both shows. I'll go on record as saying, they are both good!
By C. Spencer Beggs
"Archie Bunker may have been the most racist, homophobic blasphemer to grace the small screen until Eric Cartman was doodled into "South Park."
I wonder how many people have actually watched both shows. I'll go on record as saying, they are both good!
Tuesday, June 12, 2007
The Anvil Restaurant Responds
We are sorry that your experience was less than great at our restaurant. We have been in business almost 22 years and always try our best to please!
It is our understanding that some member of your group caused quite a sitr during the evening and delayed the group as aw hole. We have attached a letter from another member from your group with an apology for the behaviors!
We hope you will accept our apology and hope you will join us again. A gift certificate is enclosed for $20.00
Sincerely,
Danny E. Smith
Attachment
17 May 2007
M/M Danny & Ann Smith,
Proprietors
The Anvil Restaurant
Post Office Box 707
Harpers Ferry, West Virginia
Subject: Letter of Appreciation
On behalf of our Association, please accept my thanks for making us welcome in your restaurant yesterday evening and for the courtesy and assistance of your staff members during and after the dinner. Ms Renee Smith, as our hostess, did an outstanding job of handling the unnecessarily obstreperous wife of one of our members and was a great help to me.
I was involved in assisting my wife to exit the restaurant. I was so concerned for my wife’s safety that I was not available to take the appropriate action and intervene as Ms Smith was enduring the unwarranted criticism that I noted while we were leaving. Obviously there is one medication for migraine that does not go well with two excellent cocktails.
There was one entrée delivered a bit late, but I did not get any criticisms from any of our members or their guests concerning food service. The lady who was served late was not angry or displeased. The woman who took it upon herself to complain was not an officer or member of the club and has caused this kind of trouble for the last time. We expect that she will be moving away next month and that will simplify our situation. We have been asked by other restaurants to ensure that she no longer be a guest at our monthly dinners.
Thanks Again,
Roy
Now, for my comments:
I was at the dinner, I think I chatted with everyone, and I have no idea who Roy was talking about in his letter, I guess that goes to show how well I knew everyone there. My suspicions is that the staff there felt that they were treated badly, and decided to take it out on the rest of the group, still, not acceptable if you ask me.
It is our understanding that some member of your group caused quite a sitr during the evening and delayed the group as aw hole. We have attached a letter from another member from your group with an apology for the behaviors!
We hope you will accept our apology and hope you will join us again. A gift certificate is enclosed for $20.00
Sincerely,
Danny E. Smith
Attachment
17 May 2007
M/M Danny & Ann Smith,
Proprietors
The Anvil Restaurant
Post Office Box 707
Harpers Ferry, West Virginia
Subject: Letter of Appreciation
On behalf of our Association, please accept my thanks for making us welcome in your restaurant yesterday evening and for the courtesy and assistance of your staff members during and after the dinner. Ms Renee Smith, as our hostess, did an outstanding job of handling the unnecessarily obstreperous wife of one of our members and was a great help to me.
I was involved in assisting my wife to exit the restaurant. I was so concerned for my wife’s safety that I was not available to take the appropriate action and intervene as Ms Smith was enduring the unwarranted criticism that I noted while we were leaving. Obviously there is one medication for migraine that does not go well with two excellent cocktails.
There was one entrée delivered a bit late, but I did not get any criticisms from any of our members or their guests concerning food service. The lady who was served late was not angry or displeased. The woman who took it upon herself to complain was not an officer or member of the club and has caused this kind of trouble for the last time. We expect that she will be moving away next month and that will simplify our situation. We have been asked by other restaurants to ensure that she no longer be a guest at our monthly dinners.
Thanks Again,
Roy
Now, for my comments:
I was at the dinner, I think I chatted with everyone, and I have no idea who Roy was talking about in his letter, I guess that goes to show how well I knew everyone there. My suspicions is that the staff there felt that they were treated badly, and decided to take it out on the rest of the group, still, not acceptable if you ask me.
Monday, June 04, 2007
Live Free or Die Hard
Yippee-ki-yay, mother****er. John McClane will be back for a fourth Die Hard movie, I knew there was a reason I didn't buy the trilogy box set on DVD. I remember staying up late watching the first Die Hard on cable back in the day at my friend Aaron Jackson's house. I don't know how we managed to watch it, we were still in elementary school at the time, I don't think our parents would have approved!
Thursday, May 31, 2007
Filter Board - Complete
This is good news, and bad news, in several ways. The good news is, that the filter board is done. If you've been keeping up with my progress, you know it has been a while since I finished soldering everything to the board, but it wasn't testing within the specs given by the manual. It turns out, that there was nothing wrong with it, I was just testing the wrong pins on the IC, I just didn't know how to count them. I was counting the pins as if they alternated, even & odd on each side of the IC, so when I thought I was touching pins 6 & 7, I was really touching pins 4 & 16. It is a good thing that I have experienced hams in the area who can help me out. I was finally frustrated enough to take the board to Neil's place (KC9BH) and have him help me take a look at it. After about 4 seconds, I realized my mistake. The good news is i got a lesson in soldering and desoldering while I was there, and he also let me borrow a better set of wire cutters so I could trim the component leads a little better.
The next step in the project, the front panel board. There is more bad news on this front though, for the next 5 weekends, I'm pretty busy. Company Picnic on June 3, Alex's Gymnastics Show on June 9, Frederick Amateur Radio Club Hamfest on June 17, Field Day on June 20, 20 & 22, and we'll be in WV from June 29 to Jul 4.
The final piece of good news, I'll never forget how to count the pins on an IC. That is what this project is about, learning something, and I certainly learned something yesterday.
The next step in the project, the front panel board. There is more bad news on this front though, for the next 5 weekends, I'm pretty busy. Company Picnic on June 3, Alex's Gymnastics Show on June 9, Frederick Amateur Radio Club Hamfest on June 17, Field Day on June 20, 20 & 22, and we'll be in WV from June 29 to Jul 4.
The final piece of good news, I'll never forget how to count the pins on an IC. That is what this project is about, learning something, and I certainly learned something yesterday.
Thursday, May 17, 2007
Letter to The Anvil Restaurant
May 17, 2007
The Anvil Restaurant
1290 West Washington Street
Harpers Ferry, West Virginia 25425
Dear Anvil Restaurant Management,
I recently attended dinner with a large group at the Anvil Restaurant in Harpers Ferry and found the service to be less than satisfactory. My meal, a bowl of crab soup and the WV Trout was excellent, especially the trout, the sauce really made an ordinary fish fillet into an extraordinary dish. It did seem to take a while between my order and being served, but that didn't bother me much as I enjoyed the company of my group. The real trouble came when it was time to get my check. I had noticed that others in our group were getting their checks at 8:50, a short time after I finished my meal and realized that it was getting late. I did not get my check until 9:30, and wasn't able to leave until 9:35 when the waitress returned to take payment. I do not understand how it could take more than a minute to total up a sprite, bowl of soup, and an entree. Also disappointing was the waitresses failure to acknowledge and apologize for the long wait for the check as if it was the normal way business was done at the Anvil Restaurant.
I haven't decided if I will attend the Anvil Restaurant in the future, it seemed like a place where I would like to take my wife to dinner for just the two of us, and since the food was very good, I haven't put the Anvil on my list of Restaurants to avoid in the future. I don't think the experience would be the same for just my wife and I, but if it was, I would not return, and would advise those I know to avoid going as well. I understand that large groups can be difficult, but they are also often a chance to win new customers, because it may be the first visit for many in the group, as it was for me.
Sincerely,
Joseph
The Anvil Restaurant
1290 West Washington Street
Harpers Ferry, West Virginia 25425
Dear Anvil Restaurant Management,
I recently attended dinner with a large group at the Anvil Restaurant in Harpers Ferry and found the service to be less than satisfactory. My meal, a bowl of crab soup and the WV Trout was excellent, especially the trout, the sauce really made an ordinary fish fillet into an extraordinary dish. It did seem to take a while between my order and being served, but that didn't bother me much as I enjoyed the company of my group. The real trouble came when it was time to get my check. I had noticed that others in our group were getting their checks at 8:50, a short time after I finished my meal and realized that it was getting late. I did not get my check until 9:30, and wasn't able to leave until 9:35 when the waitress returned to take payment. I do not understand how it could take more than a minute to total up a sprite, bowl of soup, and an entree. Also disappointing was the waitresses failure to acknowledge and apologize for the long wait for the check as if it was the normal way business was done at the Anvil Restaurant.
I haven't decided if I will attend the Anvil Restaurant in the future, it seemed like a place where I would like to take my wife to dinner for just the two of us, and since the food was very good, I haven't put the Anvil on my list of Restaurants to avoid in the future. I don't think the experience would be the same for just my wife and I, but if it was, I would not return, and would advise those I know to avoid going as well. I understand that large groups can be difficult, but they are also often a chance to win new customers, because it may be the first visit for many in the group, as it was for me.
Sincerely,
Joseph
Monday, May 14, 2007
Caffeine Free
I've taken another break from caffeine, and well, I'm tired. It is 9:30 in the morning and I'm tired already. Since my drink of choice is Mountain Dew, every once in a while I like to prove to myself that I'm not addicted to caffeine, the last time was over 2 years ago. I don't drink Mountain Dew for its caffeine, I drink it because I like it. The side effect is that the caffeine creates a bit of a physical dependence that I could do without. I've had a few headaches and I've been more tired than normal, which will probably last about a week. I figure I'll stay caffeine free for about a month, for now, I'll drink a lot more water and other beverages that don't contain caffeine.
Friday, May 11, 2007
Filter Board - everything is soldered
Notice I didn't say it was done. When I was testing it, the results didn't match the manual. I'm not quite sure what it is, I'm hoping to get some hints from the mailing list. The good news is, I got a good picture of what the board is supposed to look like!
Wednesday, May 09, 2007
Slight Progress
I planned on doing more tonight, really, I did. But I did get something done, I wound the toroidal inductors "toroids". A lot of folks seemed to think this was hard, but it didn't seem so hard to me. I was a little worried, so I took a good closeup picture and sent it off to the Elecraft mailing list, I got a bunch of replies saying that they were just fine.

I meant to actually get these soldered to the filter board tonight, but I was distracted by a 10 meter opening. I didn't make a to many contacts, made a few of those almost contacts but the fading seemed to always happen when the other station gave his call sign.

I meant to actually get these soldered to the filter board tonight, but I was distracted by a 10 meter opening. I didn't make a to many contacts, made a few of those almost contacts but the fading seemed to always happen when the other station gave his call sign.
Thursday, May 03, 2007
HD DVD AACS Encryption Key
No, the number isn't here. What I have to say is, why 16 bytes? I'm surprised it took this long to be broken, or, at least be broken and made public. It looks like the Advanced Access Content System License Authority has revoked the published key, so new HD DVDs won't be able to be used with it. Eventually, one of two things will happen, someone will figure out how to generage useable keys, or the AACS LA will run out of keys to revoke, it isn't like you can just download some new keys into your HD DVD player. Will older HD DVD players not be able to play new titles once they run out of keys?
For me, I like netflix, it is a cheap way to watch movies just about whenever you want, and a hell of a lot easier than downloading them.
For me, I like netflix, it is a cheap way to watch movies just about whenever you want, and a hell of a lot easier than downloading them.
Exchange Database Maintenance
Microsoft has come a long way with the Exchange databases, so long in fact, that under normal circumstances, all you really have to do is leave them alone, and they will work fine. My situation isn’t exactly normal. The organization is migrating from a system that was basically unlimited (until they decided to purge old mail because they ran out of space) to a controlled system. Of course, they don’t have to clean up before they are migrated, so, here comes the 6 gig mailboxes. Then they clean up. This along with a delay in deploying the last two servers (which caused many more users than expected added to the first two, then moved once the last two were up) caused us to end up with several databases with more white space than actual data. This is hard on the backups, since, it backs up the white space too, 466 gigabytes worth, and it is getting a little too close for comfort on available disk space on the drives in which the databases reside. So, I get to spend a weekend running defrag scripts. Fortunately, I have it automated enough that all I have to do is keep an eye on it to make sure nothing goes wrong, but, I still have to keep an eye on it.
Tuesday, May 01, 2007
New Aidan Pic
I put a new picture of Aidan in the title of the blog. I think I might have to work on it a little, zoom in a little more so you can actually see him. The file is only 100x100 pixels, which isn't much to work with, but I think I can make it a little better.
Filter Board Progress - 40 Meters
Tonight I finished up installing the relays that I started yesterday and moved on to the bag of parts that will make this radio work on the 40 meter band, 7 MHz. There were 13 capacitors to install, plus a 3 that I installed just after the relays. My soldering still looks good, but I think I need another tool to be more precise when clipping the leads.

I used the flash this time - I don't know what makes a better picture.

I used the flash this time - I don't know what makes a better picture.
Top Row Pictures, I need a new Aidan Pic
I think I need a new picture of Aidan. I like that pic, but it is from over a year ago, and for kids that age, a year can make a huge difference.
Monday, April 30, 2007
Started Building My New Radio
I've started building my new Amateur Radio transceiver, the Elecraft K1 CW transceiver kit. I've inventoried the parts, and I've installed the first few components. I was worried about my soldering ability, but my first 22 solder connections look pretty good.
I'm going to try to take photographs of my progress and post them to http://picasaweb.google.com/joseph.durnal/ElecraftK1TransceiverBuild. This job will be done in many short sessions over a period of time, although, tomorrow night and the next day I should have more time than normal to work on it, so, maybe, I'll finish the filter board, we'll see. I'm not in a hurry.
Top

Bottom

I admit, it looks like an empty circuit board, but after a few sessions, it will have stuff on it, I promise.
I'm going to try to take photographs of my progress and post them to http://picasaweb.google.com/joseph.durnal/ElecraftK1TransceiverBuild. This job will be done in many short sessions over a period of time, although, tomorrow night and the next day I should have more time than normal to work on it, so, maybe, I'll finish the filter board, we'll see. I'm not in a hurry.
Top
Bottom
I admit, it looks like an empty circuit board, but after a few sessions, it will have stuff on it, I promise.
Amy's Spaghetti Sauce
I'm so looking forward to my lunch today, it is leftover spaghetti from last night's dinner. What is so good about last night's leftovers? Well, Amy's spaghetti sauce of course, it is the best I've ever had. This sauce is no marinara, it is all about the meat, and anyone that knows me, knows that I like meat. I don't know the exact recipe, but it includes ground beef, sausage, and pepperoni. There are some other things, like spices, onion, green pepper, and occasionally mushrooms, oh yea, and tomato paste. I just can't get over how much I like it. The good news is, she can make a big batch, and freeze some so we can have it again and again!
Friday, March 30, 2007
New Amateur Radio Call Sign – NE3R
Ok, so it has been a little over a week, but on March 20, I was issued a new call sign, NE3R. I wasn’t sure I wanted to change my call sign, but I figured, since they have removed the Morse code proficiency requirement for obtaining an amateur radio license, that there would be a lot more folks obtaining Amateur Extra class licenses, which is a requirement for the short 2x1 or 1x2 call signs. I decided that I would go ahead and do it, since I may not have the option later on.
So, why NE3R, well, for one, it was available, well, sort of. It belonged to a ham radio operator who passed away in 2004. NE3R is fairly easy to say, and its phonetics come out pretty easily too, November Echo 3 Romeo. The best part is it is short when sent in Morse code ( -. . ...-- .-. ).
So, why NE3R, well, for one, it was available, well, sort of. It belonged to a ham radio operator who passed away in 2004. NE3R is fairly easy to say, and its phonetics come out pretty easily too, November Echo 3 Romeo. The best part is it is short when sent in Morse code ( -. . ...-- .-. ).
Thursday, March 15, 2007
The Antenna is Up!
It has been up for about two weeks now. It took me a little while to get the pictures up! This isn't the best of ham radio antennas, but it fits in the back yard, and isn't so big the whole neighborhood can see it, which is good, because antennas aren't allowed by the home owners association.
Yes, that is the coax tangled with one of the radials, I still need to fix that. I followed the directions and used 1.25" plumbers pipe as the base, but the supplied U bolts didn't fit around it and I ended up using several hose clamps.

View from inside the back yard. The neighbors in my row will certainly notice, but I don't think it will be too much of a problem.

From outside the back yard the antenna is definitely viable, but it doesn't really stand out. I could probably add some paint and make it stand out a little less. Now that I look at it, I may have been able to go with something taller.

I know that radials work best when they aren't buried, but I don't exactly have that option, especially when the radials extend well beyond my fence into the common area of the development.
Yes, that is the coax tangled with one of the radials, I still need to fix that. I followed the directions and used 1.25" plumbers pipe as the base, but the supplied U bolts didn't fit around it and I ended up using several hose clamps.
View from inside the back yard. The neighbors in my row will certainly notice, but I don't think it will be too much of a problem.
From outside the back yard the antenna is definitely viable, but it doesn't really stand out. I could probably add some paint and make it stand out a little less. Now that I look at it, I may have been able to go with something taller.
I know that radials work best when they aren't buried, but I don't exactly have that option, especially when the radials extend well beyond my fence into the common area of the development.
Thursday, March 01, 2007
Ham Radio License Finally Updated
It seems weird, when I passed the technician exam back in 1993 it took about six weeks for my license to show up in the mail. That was ok, because I didn't really know any better, and I didn't have a radio to use anyway. Back in the days without online databases, you could only check the mail once a day anyway. These days, folks can get their licenses in just a day or two, they don't have to wait for the actual license to show up in the mail, and just being in the database is enough authority to use the radio. A little over a year ago, when I passed my general class exam, the upgrade was in the database in only three days. So, imagine my surprise when at the end of the week last week, after passing my extra class test the previous Saturday, the FCC still hadn't updated my license.
It turns out that there were a few problems; the first was due to an error in my paperwork that had to be corrected by the volunteer examiners before it was submitted. Then, another volunteer who did the data entry for adding the information to the FCC database was out of town for a while. Add to that a flood of new upgrades because of the recent rule FCC rule changes that removed the Morse code proficiency exam, and it took nearly two weeks for my license to be upgraded in the FCC database. Oh yeah, and one federal holiday.
I was hoping to have the upgrade posted before February 23, 2007, before the Morse code exam was eliminated, but that didn't happen. I'm glad it was upgraded before this weekend though, I'll be participating in the ARRL DX Contest, and I didn't want to have to say N3PAQ/AE whenever I used a frequency that is outside of the general class portion of the band. N3PAQ is long enough :) -- I will be changing my call sign to something shorter soon.
It turns out that there were a few problems; the first was due to an error in my paperwork that had to be corrected by the volunteer examiners before it was submitted. Then, another volunteer who did the data entry for adding the information to the FCC database was out of town for a while. Add to that a flood of new upgrades because of the recent rule FCC rule changes that removed the Morse code proficiency exam, and it took nearly two weeks for my license to be upgraded in the FCC database. Oh yeah, and one federal holiday.
I was hoping to have the upgrade posted before February 23, 2007, before the Morse code exam was eliminated, but that didn't happen. I'm glad it was upgraded before this weekend though, I'll be participating in the ARRL DX Contest, and I didn't want to have to say N3PAQ/AE whenever I used a frequency that is outside of the general class portion of the band. N3PAQ is long enough :) -- I will be changing my call sign to something shorter soon.
Subscribe to:
Posts (Atom)





